Direct answer

What you need to know

SS 513:2024 aligns Singapore with EN ISO 20345:2022 and introduces S6 and S7 classes, P/PL/PS puncture markings and a new SR slip marking. Because certificates are model- and edition-specific, buyers should verify the current certificate and the markings on the shoe for the exact model before procurement.

Singapore buyers now see two markings on the same shortlist: SS 513 and EN ISO 20345. They are not competing standards — the current Singapore edition is aligned with the international one.

What changed in SS 513:2024

SS 513:2024 was published as SS 513-1:2024 and SS 513-2:2024. The earlier 2015 edition was based on EN ISO 20345:2011; the 2024 edition aligns with EN ISO 20345:2022, which brings several practical changes:

  • New protection classes S6 and S7 — the same protection as S2 and S3, plus whole-footwear water resistance.
  • Updated puncture markings: P, PL or PS now identify the insert type and test condition, rather than a single general puncture symbol.
  • A revised slip marking system: the older SRA/SRB/SRC markings were replaced by SR (higher wet-slip performance) and Ø (not tested).
  • WPA (water penetration and absorption) for uppers, with full WR water resistance for whole footwear.

How the two standards sit together

EN ISO 20345:2022+A1:2024 is the international reference that many projects specify, while SS 513 is the national standard referenced in Singapore workplace-safety requirements. Because SS 513:2024 adopts EN ISO 20345:2022, a model certified to the international standard with the class and markings the workplace needs is frequently acceptable — but tenders and employers often ask for SS 513 evidence directly, so the model-level certificate is what proves the position.

Why edition and model still matter

  • A certificate citing SS 513:2013 can be valid for the model it was issued against. Earlier RHINO SHOE certificates may correctly reference SS 513:2013 for the certified model.
  • Selected Ultranite models publish SS 513 certificates. Before specifying, confirm which edition, class and markings the current certificate carries.
  • Some tenders name the standard without the edition. Clarify the edition the tender means before submitting documentation.

What to request before procurement

  1. The current certificate or declaration for the exact model, with edition and class stated.
  2. The markings on the shoe — class, P/PL/PS, slip and water-resistance markings — matched against the certificate.
  3. Size availability and lead time for Singapore delivery.

RHINO SHOE is manufactured in Malaysia and supplies Singapore through Safetyware Singapore. For model-level SS 513 evidence, request the certificate against the specific model and market configuration you are specifying. See also our guide to EN ISO 20345:2022+A1 and the Singapore market page.

Important

Safety footwear must be selected through a workplace risk assessment. Standards, certification and DOSH–SIRIM approval are model-specific; confirm current documentation before procurement.